Audio Technica AT-VM95SH Dual Moving Magnet Cartridge

NEW STOCK ETA JUNE 2024

Meet the AT-VM95SH from Audio Technica

Dual Moving Magnet Cartridge

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. This cartridge offers excellent channel separation and low distortion for outstanding tonal quality.

Durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required.

Since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Technical Specifications

Type
VM Stereo Dual Magnet

Mounting
½” centres

Frequency Response
20 to 25,000 Hz

Channel Separation
23 dB (1 kHz)

Output Channel Balance
1.5 dB (1 kHz)

Output Voltage
3.5 mV (at 1 kHz, 5 cm/sec)

Vertical Tracking Angle
23 degrees

Stylus Shape
Shibata

Stylus Size
2.7 x 0.26 mil

Cantilever
Aluminium Pipe

Static Compliance
20 x 10^(–6cm) / dyne

Dynamic Compliance
10 x 10^(–6 cm) / dyne (100 Hz)

Wire Used for Coil
T.P. Copper

Recommended Load Impedance
47,000 Ω

Coil Impedance
3.3 K Ω (1kHz)

DC Resistance
485 Ω

Coil Inductance
550 mH (1 kHz)

Cartridge Weight
6.1 g

Dimensions
17.2 (H) x 18.9 (W) x 28.3 (L) mm

Mounting
1/2" Centres

Warranty
1 year limited warranty

Included Accessories

• Two 11 mm installation screws
• Two 8 mm installation screws
• Two washers
• Non-magnetic screwdriver

*Information obtained from Manufacturers Website